Facebook
  • 12.8V 121.6Ah LiFePO4 4S32P battery pack product illustration - 26650 4S32P M8 Display
  • 12.8V 121.6Ah LiFePO4 4S32P battery pack product illustration - 26650 4S32P M8 Display

12.8V 121.6Ah Custom LiFePO4 Battery Pack | 26650 4S32P M8 Display

No.SL-LFP-12.8V-121.6AH-4S32P-M8

12.8V 121.6Ah custom LiFePO4 battery pack with 26650 4S32P cells, approximately 1556.48Wh nominal energy. 26650 4S32P M8 Display configuration for OEM integration.

  • 12.8V 121.6Ah LiFePO4 4S32P battery pack product illustration - 26650 4S32P M8 Display

Description

A 12.8V 121.6Ah Pack: 26650 4S32P M8 Display

This 12.8V 121.6Ah custom LiFePO4 battery pack uses 26650 cells in a 4S32P arrangement, providing approximately 1556.48Wh nominal energy. Positive and negative M8 terminal holes; electricity display board.

Body dimensions are (328 ± 3) × (172 ± 2) × (212 ± 3)mm, with a reference weight of 14.3 ± 0.3kg. The product illustration is a configuration reference; allow clearance for leads, connectors and mounting hardware.

Datasheet Values for the 12.8V 121.6Ah Build

Parameter Specification
Surlon website model SL-LFP-12.8V-121.6AH-4S32P-M8
Chemistry / cell arrangement LiFePO4 / 26650 4S32P
Nominal voltage 12.8V
Rated / minimum capacity 121.6Ah / 117.6Ah at C5
Nominal energy Approximately 1556.48Wh
Internal resistance ≤35mΩ
Body dimensions (328 ± 3) × (172 ± 2) × (212 ± 3)mm
Weight 14.3 ± 0.3kg
Shell material Plastic
Charging voltage 14.4 ± 0.15V
Charging current ≤60A
Charge cut-off current 1216-2432mA
Discharge cut-off voltage Approximately 10.0V
Discharge current 135A normal; 135-200A for ≤30 seconds
Power interface Positive and negative M8 terminal holes; electricity display board.
Protection functions Overcharge, over-discharge and temperature protection; balancing
Charging temperature 0°C to 45°C
Discharging temperature -20°C to 60°C
Cycle life ≥2000 cycles with ≥80% retained capacity under the specified standard test
Charge retention ≥80% after 28 days under the specified standard test

Electrical Strengths of the 4S32P Build

  • 121.6Ah rated capacity and approximately 1556.48Wh nominal energy.
  • Defined discharge profile: 135A normal; 135-200A for ≤30 seconds.
  • 14.4 ± 0.15V charging voltage, with current ≤60A.
  • Positive and negative M8 terminal holes; electricity display board.

How This Build Differs from Its Siblings

Match capacity, enclosure dimensions, cell arrangement and load duration when selecting a 12.8V pack. M5, M6, M8, Φ5.5 terminals and separate charging sockets require different mating hardware; a matching nominal voltage alone does not establish compatibility.

Explore the Custom LiFePO4 Battery Packs range for related configurations.

Duty, Charge and Temperature Limits

  • Charge at 14.4 ± 0.15V with current ≤60A. Charge cut-off current: 1216-2432mA.
  • Discharge specification: 135A normal; 135-200A for ≤30 seconds. A connector current designation does not change the pack current rating. Preserve the duration of every higher-current allowance.
  • Charge from 0°C to 45°C; discharge from -20°C to 60°C. Provide ventilation and heat dissipation above 45°C; avoid condensation and keep ambient relative humidity ≤85%.
  • Cycle life: ≥2000 cycles with ≥80% retained capacity. Standard testing uses 25 ± 2°C and 65 ± 20% RH, CC/CV charging at I5 to 0.05 I5, discharge at I5 to approximately 10.0V or pack cut-off, and 0.5-1 hour rest after charge and discharge. If I5 exceeds normal operating current, use normal operating current.
  • Store dry at 0°C to 40°C, preferably 15°C to 25°C. Do not connect complete packs in series or parallel.

Connecting the Specified Power Interface

Positive and negative M8 terminal holes; electricity display board.

  1. Verify the approved drawing, polarity and mating interface before connection.
  2. Match charger settings and the equipment input voltage range to this pack.
  3. Secure the enclosure and provide lead clearance and strain relief.
  4. Confirm the approved terminal drawing, polarity and fastening requirements before connecting the equipment.

Devices That Match This Discharge Profile

Potential applications include OEM DC equipment, control systems and monitoring assemblies designed for the specified voltage window. Suitability depends on the actual load, runtime target, enclosure fit and interface compatibility. Validate the pack in the intended equipment before production approval.

Technical Support & Model Matching

Quote website model SL-LFP-12.8V-121.6AH-4S32P-M8 and provide the load profile, compartment drawing, charger specification and host interface requirements to Surlon Power. Confirm the final configuration and sample performance before ordering.

FAQ

What is the Surlon website model?

SL-LFP-12.8V-121.6AH-4S32P-M8 identifies this 12.8V 121.6Ah 26650 4S32P M8 Display configuration.

What charging limits apply?

14.4 ± 0.15V; current ≤60A; charge cut-off current 1216-2432mA; charging temperature 0°C to 45°C.

What is the discharge-current limit?

135A normal; 135-200A for ≤30 seconds. Keep every higher-current interval within its stated duration.

Which power interfaces should be matched?

Positive and negative M8 terminal holes; electricity display board.

How is cycle life specified?

At least 2000 cycles with at least 80% retained capacity under the specified standard charge/discharge test, including its current, temperature and 0.5-1 hour rest conditions.

Download

REQUEST A BATTERY QUOTE

Tell us about your equipment and battery requirements. Share the details you know, and our team can discuss the next steps for your project.
Name
Email *
Message
Leave a message
Name
Email *
Message
Message Us