Facebook
  • 12.8V 19.2Ah LiFePO4 4S12P battery pack product illustration - 18650 4S12P PVC Leads
  • 12.8V 19.2Ah LiFePO4 4S12P battery pack product illustration - 18650 4S12P PVC Leads

12.8V 19.2Ah Custom LiFePO4 Battery Pack | 18650 4S12P PVC Leads

No.SL-LFP-12.8V-19.2AH-4S12P-PVC

12.8V 19.2Ah custom LiFePO4 battery pack with 18650 4S12P cells, approximately 245.76Wh nominal energy. 18650 4S12P PVC Leads configuration for OEM integration.

  • 12.8V 19.2Ah LiFePO4 4S12P battery pack product illustration - 18650 4S12P PVC Leads

Description

A 12.8V 19.2Ah Pack: 18650 4S12P PVC Leads

This 12.8V 19.2Ah custom LiFePO4 battery pack uses 18650 cells in a 4S12P arrangement, providing approximately 245.76Wh nominal energy. Shared charge/discharge leads: 14AWG, 150 ± 10mm, red positive and black negative. Mating connector is not specified.

Body dimensions are (167 ± 3) × (138 ± 3) × (73 ± 2)mm, with a reference weight of 2.16 ± 0.2kg. The product illustration is a configuration reference; allow clearance for leads, connectors and mounting hardware.

Datasheet Values for the 12.8V 19.2Ah Build

Parameter Specification
Surlon website model SL-LFP-12.8V-19.2AH-4S12P-PVC
Chemistry / cell arrangement LiFePO4 / 18650 4S12P
Nominal voltage 12.8V
Rated / minimum capacity 19.2Ah / 18.2Ah at C5
Nominal energy Approximately 245.76Wh
Internal resistance ≤60mΩ
Body dimensions (167 ± 3) × (138 ± 3) × (73 ± 2)mm
Weight 2.16 ± 0.2kg
Shell material PVC
Charging voltage 14.4 ± 0.15V
Charging current ≤8A
Charge cut-off current 192-384mA
Discharge cut-off voltage Approximately 10.0V
Discharge current ≤10A normal; no higher peak rating specified
Power interface Shared charge/discharge leads: 14AWG, 150 ± 10mm, red positive and black negative. Mating connector is not specified.
Protection functions Overcharge, over-discharge and temperature protection; balancing
Charging temperature 0°C to 45°C
Discharging temperature -20°C to 60°C
Cycle life ≥2000 cycles with ≥80% retained capacity under the specified standard test
Charge retention ≥80% after 28 days under the specified standard test

Electrical Strengths of the 4S12P Build

  • 19.2Ah rated capacity and approximately 245.76Wh nominal energy.
  • Defined discharge profile: ≤10A normal; no higher peak rating specified.
  • 14.4 ± 0.15V charging voltage, with current ≤8A.
  • Shared charge/discharge leads: 14AWG, 150 ± 10mm, red positive and black negative. Mating connector is not specified.

How This Build Differs from Its Siblings

The 19.2Ah PVC Leads build measures (167 ± 3) × (138 ± 3) × (73 ± 2)mm and permits charging at ≤8A and normal discharge at ≤10A. The Plastic M5 build measures (181 ± 2) × (76.5 ± 1) × (168 ± 3)mm, permits charging at ≤3.9A, and specifies 15A normal discharge with 15-20A limited to one minute.

Explore the Custom LiFePO4 Battery Packs range for related configurations.

Duty, Charge and Temperature Limits

  • Charge at 14.4 ± 0.15V with current ≤8A. Charge cut-off current: 192-384mA.
  • Discharge specification: ≤10A normal; no higher peak rating specified. A connector current designation does not change the pack current rating. Preserve the duration of every higher-current allowance.
  • Charge from 0°C to 45°C; discharge from -20°C to 60°C. Provide ventilation and heat dissipation above 45°C; avoid condensation and keep ambient relative humidity ≤85%.
  • Cycle life: ≥2000 cycles with ≥80% retained capacity. Standard testing uses 25 ± 2°C and 65 ± 20% RH, CC/CV charging at I5 to 0.05 I5, discharge at I5 to approximately 10.0V or pack cut-off, and 0.5-1 hour rest after charge and discharge. If I5 exceeds normal operating current, use normal operating current.
  • Store dry at 0°C to 40°C, preferably 15°C to 25°C. Do not connect complete packs in series or parallel.

Connecting the Specified Power Interface

Shared charge/discharge leads: 14AWG, 150 ± 10mm, red positive and black negative. Mating connector is not specified.

  1. Verify the approved drawing, polarity and mating interface before connection.
  2. Match charger settings and the equipment input voltage range to this pack.
  3. Secure the enclosure and provide lead clearance and strain relief.
  4. Confirm the approved terminal drawing, polarity and fastening requirements before connecting the equipment.

Devices That Match This Discharge Profile

Potential applications include OEM DC equipment, control systems and monitoring assemblies designed for the specified voltage window. Suitability depends on the actual load, runtime target, enclosure fit and interface compatibility. Validate the pack in the intended equipment before production approval.

Technical Support & Model Matching

Quote website model SL-LFP-12.8V-19.2AH-4S12P-PVC and provide the load profile, compartment drawing, charger specification and host interface requirements to Surlon Power. Confirm the final configuration and sample performance before ordering.

FAQ

What is the Surlon website model?

SL-LFP-12.8V-19.2AH-4S12P-PVC identifies this 12.8V 19.2Ah 18650 4S12P PVC Leads configuration.

What charging limits apply?

14.4 ± 0.15V; current ≤8A; charge cut-off current 192-384mA; charging temperature 0°C to 45°C.

What is the discharge-current limit?

≤10A normal; no higher peak rating specified. Keep every higher-current interval within its stated duration.

Which power interfaces should be matched?

Shared charge/discharge leads: 14AWG, 150 ± 10mm, red positive and black negative. Mating connector is not specified.

How is cycle life specified?

At least 2000 cycles with at least 80% retained capacity under the specified standard charge/discharge test, including its current, temperature and 0.5-1 hour rest conditions.

Download

REQUEST A BATTERY QUOTE

Tell us about your equipment and battery requirements. Share the details you know, and our team can discuss the next steps for your project.
Name
Email *
Message
Leave a message
Name
Email *
Message
Message Us